Pro-Form PFEX15914.0 User Manual page 14

15. IMPORTANT: If you purchased the optional
iFit module, insert the iFit module into the iFit
port on the Console (5) before you attach the
Tablet Holder (114). After the exercise bike is
assembled, follow the instructions included
with the iFit module.
Attach the Tablet Holder (114) to the Console (5)
with four #8 x 19mm Screws (115); start all the
Screws, and then tighten them.
16. Plug the Power Adapter (107) into the receptacle
on the front of the exercise bike.
Note: To plug the Power Adapter (107) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 15.
17. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Extra parts may be included. Place a mat beneath the exercise bike to protect the floor.
15
iFit Port
5
16
14
114
115
107