Control Panel Instructions; Lighting Operation - Saunatec IG-820-SH/S820 User Manual

Control Panel Instructions:

Color Therapy
Lights
Main Power:
Press POWER to switch room ON or OFF
Timer Functions:
Press and hold "+" or "-" to set room operating time.
Increases time (5 minute increments) / Decreases time (5 minute increments)
Temperature Functions:
Press to alternate between either C or F (C or F will light to indicate the units desired)
Press and hold + or – to set desired room temperature setting.
Pressing once will increase or decrease the desired setting in one-degree increments.
Once the desired room temperature is set, the desired temperature will flash three (3) times
After the fourth (4th) flash, the actual room temperature will remain displayed.
Press Bench Heat to turn ON or OFF
Light Functions: Note – All Lights will operate with main power selection ON or OFF.
Press Interior Lights to turn ON or OFF
Press Valance Light to turn ON or OFF
Color Therapy Functions:
Press Color Therapy Light to activate a color light or sequence. The following details this sequence:
1st press – RED
2nd press – RED-GREEN
3rd press – GREEN
4th press – BLUE-GREEN
5th press – BLUE
6th press – BLUE-RED
7th press – BLUE-RED-GREEN
8th press – Activates full rotation of all 7 color therapy in sequence noted above
9th press – Turns Color Therapy Functions OFF
710-0125 IG-820-SH / S820-H 2 Person IR Sauna
Ver. 3
Interior Lights
Page 15
Power ON Valance
or OFF Light
Bench Heat
04/09/19
Rev. 4