Sound Adjustment - Sanyo PLC-XU4000 Owner's Manual

Hide thumbs Also See for PLC-XU4000:

Service manual (110 pages)

Owner's manual (78 pages)

Brochure & specs (2 pages)

Table Of Contents

Table of Contents

Basic Operation

Direct Operation

Volume

Press the VOLUME+/– buttons on the top control or on the

remote control to adjust the volume. The volume dialog box

appears on the screen for a few seconds.

Mute

Press the MUTE button on the remote control to select On

to temporarily turn off the sound. To turn the sound back

on, press the MUTE button again to select Off or press the

VOLUME +/– buttons. The Mute function is also effective for

the AUDIO OUT jack.

Press the MENU button to display the On-Screen Menu.

Use the Point

Point

button or the SELECT button to access the

submenu items.

Use the Point

submenu item and press the SELECT button to access

the selected item.

Volume

Mute

Press the SELECT button to switch the mute function On/

Off. When the sound is turned off, On is displayed. Press

the VOLUME +/– buttons again to turn the sound back on.

MIC

On/Off, and then press the SELECT button. When On is

selected, the synthesis volume (MIC and RCA) is output.

MIC gain

Standby MIC out

When switch the Standby MIC out function On and in

Standby mode out status, only MIC volume can be output.

Note:

Off is selected in MIC function, the MIC gain and

Standby MIC out functions are not available.

Standby mode is set to Network, Standby MIC

out can be selected.

to the COMPUTER AUDIO IN 2 (MIC IN), loud sound may

be output suddenly depending on the setting value of MIC

gain.