Modes Of Operation; Sdp Controlled Mode; Standalone Mode - Analog Devices EVAL-AD7903SDZ User Manual

UG-609

MODES OF OPERATION

SDP CONTROLLED MODE

The AD7903 uses a high speed serial interface that allows sampling
rates of up to 1 MSPS. For more information about the operation of
the serial interface, refer to the
The AD7903 uses the serial interface to transfer data to the
EVAL-SDP-CB1Z.
The EVAL-AD7903SDZ communicates with the
board using level shifters. The
3.3 V logic level, which allows logic voltages that exceed 3.3 V
to be used without damaging the SDP interface.
AD7903 data sheet.
EVAL-SDP-CB1Z
EVAL-SDP-CB1Z operates at a

STANDALONE MODE

The EVAL-AD7903SDZ
CB1Z controller board. In this case, the
connected to the serial interface using the J5 connector or the
test points. For more information about the operation of the
serial interface, refer to the
Rev. 0 | Page 12 of 32
EVAL-AD7903SDZ User Guide
can also be used without the
EVAL-AD7903SDZ
AD7903 data sheet.
EVAL-SDP-
is