Shut Down The Array Using The Gui - HP HPE Alletra 6010 Hardware Manual

1 Slot 1
2 Slot 2
3 Slot 3
4 Slot 4
5 Slot 5
Array rear view - HPE Alletra 6010
In this example, quad fc ports are installed in Slot 1 and quad eth ports are installed in Slot 2 and Slot 3.
1 Slot 1
2 Slot 2
3 Slot 3

Shut Down the Array Using the GUI

This action shuts down the array and any expansion shelves managed by the array.
For most hardware changes you do not need to shut down (power off) the array because the components are redundant and
hot swappable.
CAUTION: When you shut down the array, all volumes go offline.
Procedure
1. In the main menu, choose Administration > Shutdown.
2. Click Shut Down Array.
6 Slot 6
7 Serial port
8 OCP expansion slot
9 Eth0 ports, onboard
4 Serial port
5 OCP expansion slot
6 Eth0 ports, onboard
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Array Components 45