HP 3100-48 v2 Installation Manual page 23

BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 4 Description on the fields
Item
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
• If you perform no operation or press a key other than Ctrl + B within one second, once the
remaining waiting time becomes zero, the system begins to automatically start up and the following
information is displayed:
Starting to get the main application file--flash:/3100-48_v2.app!.................
...............................................................................
...............................................................................
....
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
Description
Download a software package file to the Flash memory.
Select the software package file to boot.
Display all files in the Flash memory
Delete files from the Flash memory
Modify the Boot ROM password
Access the Boot ROM update menu.
Start the switch with the factory default configuration. This is a
one-time operation and does not take effect at the next reboot. You
use this option when you forget the console login password.
Disable or enable the Boot ROM password recovery function. By
default, Boot ROM recovery is enabled. You can disable this
function to protect system security.
Set the startup mode of the switch to normal (full) mode or fast
mode, as described in "Changing the startup
Restart the switch
19
mode."