Preparing For Measurement - Beurer BC 21 Instructions For Use Manual

LCD Display Information:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Pulse Rate
5. Pulse Icon /
Irregular Hartbeat
Indicator
6. Inflation,
Deflation Indicator ( )
7. User Number /
8. Blood Pressure Classification
9. Memory number / Display for
average ( ) / / Values
10. Voice Icon
11. Battery Level Indicator

5. Preparing for Measurement

Inserting/Replacing Batteries:
1. Remove the Battery Compartment Cover.
2. Insert two AAA size alkaline batteries (included)
according to the polarity markings inside the
battery compartment. Do not use rechargeable
batteries.
3. Reattach the Battery Compartment Cover.
6
5
When the Low Battery Icon flashes, replace the
batteries. After inserting batteries, the 12h time format
indicator flashes on the LCD Display and you can then
set the date and time.
Setting the hour format, date, and time:
If date and time are not set, stored measurements will
not have a valid timestamp associated with them.
1. If the time format is not flashing in the LCD Display,
press and hold the Memory Button M for about five
seconds.
2. With the time format flashing on the LCD
Display, press the Memory Button M until
the desired time format appears (12 for
AM/PM format or 24 for 24-hour format)
and then press the START/STOP button
to confirm.
3. The year flashes on the LCD Display.
Press the Memory Button M to set
13