Beurer BM 76 Instructions For Use Manual page 22

Average values
• Press the M button. ' ' flashes on the
display. The average of all saved meas-
urements in the selected user memory
is displayed.
• Press the M button again. ' ' flashes
on the display. The average value of the
morning measurements for the last sev-
en days is displayed (morning: 5:00 AM
– 9:00 AM).
• Press the M button a third time. ' '
flashes on the display. The average val-
ue of the evening measurements for the
last seven days is displayed (evening:
6:00 PM – 8:00 PM).
Individual Measured Values:
• Press the M button again and the last in-
dividual measurement is displayed.
• To shut the device off, press the Start/
Stop button .
You can exit the menu at any time by pressing the
Start/Stop button
Clearing Memory:
• When an individual stored measurement is displayed,
press and hold both the + and - buttons for five
seconds. All values in the selected user memory will
be deleted.
Copying Stored Measurements using
Bluetooth
®
1. Download and install the 'beurer HealthCoach'
app from your device's app store. Run the app and
make sure 'BM 76' is selected under 'Settings/My
devices'.
2. Ensure Bluetooth
on the blood pressure monitor.
3. Access stored measurements on the unit as
described in the section 'Displaying and deleting
measurements'. Bluetooth
begin automatically if the two devices are paired
properly.
22
.
is activated on your device and
®
data transfer should
®