Beurer BM 76 Instructions For Use Manual page 18

If the values between the two arms are significantly
different, please consult your doctor to determine
which arm should be used for the measurement.
CAUTION:
Only use original Beurer cuffs with this device. The
included cuff is suitable for an arm circumference of
8.7 – 17.3 inches (22 – 44 cm). For larger arm
circumferences, contact customer service to order
a larger cuff.
Correct Posture:
• Rest for at least five minutes before each
measurement.
• Perform the measurement either sitting or lying
down. Always make sure that the cuff is level with
your heart.
• To perform a measurement, sit comfortably with
your arms and back supported. Do not cross your
legs and place your feet flat on the floor.
• Keep still during the measurement and do not talk.
• Relax your arm and the palm of your hand.
Select a User Memory
This unit has four user numbers, each with 30
storage slots each.
1. Press the SET Button and select a user memory
from 1 to 4 using the +/- Buttons.
2. Confirm by pressing the Start/Stop Button or just
wait for three seconds to set the user number.
Performing a Measurement
1. With the cuff attached properly and in a correct
posture, press the Start/Stop button
LCD Display elements will briefly display and
measurement will begin after about three seconds.
To cancel a measurement at any time, press the
Start/Stop Button
18
.
. All