Beurer BM 76 Instructions For Use Manual page 9

accepted at the time of measurement. Speak with
your physician about possible causes affecting
your blood pressure.
• Do not inflate the cuff unless wrapped around arm.
• Do not touch the unit, the tube and cuff and/
or press any buttons when measurement is in
progress, except for stopping the measurement.
Doing so may cause incorrect readings.
NOTICE:
• The blood pressure monitor is made up of precision
electronic components. Accuracy of readings and
the instrument's service life depend on careful
handling. Protect the unit against hard knocks
(e.g. dropping the unit), moisture, water, dirt, dust,
chemicals, extreme hot or cold temperatures,
major temperature fluctuations, direct exposure
to sunlight and heat sources which are too close
(e.g. stoves, heating radiators). This may damage
the unit. The device must be stored in the specified
ambient conditions. Please see section '10. Care
and Maintenance' and section '12. Technical
Specifications' for details.
• Do not use any aggressive solvents, cleaning
agents, detergents or any other strong chemicals
to clean the device.
• Never immerse and or spill water or any other liquid
onto the monitor or any components, otherwise
liquid will enter it and cause damage.
• Do not wash the unit in a washing machine, dish
washer or tumble dryer.
• Observe the local regulations for material
disposal. Dispose of the device, components
and optional accessories according to applicable
local regulations. Unlawful disposal may cause
environmental pollution.
• Never attempt to repair, open and/or disassemble
the unit (including cuff and optional accessory) or
adjust it yourself. This may damage the unit and
impair the functions. If you need to have the unit
repaired, please contact our customer service.
Please see warranty for service contact. Before
submitting any complaint, first check the batteries
and replace them if necessary.
• Changes or modifications to the device will nullify
the user warranty.
9