Table of Contents
Advertisement
9
174
Tighten axle clamping screws 1
to appropriate torque.
z
Clamping screw in axle
adapter
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Remove front wheel stand.
Slide the brake calipers on the
left-hand and right-had side
onto the brake rotors.
Install mounting bolts 4 on
left and right with appropriate
torque.
Brake caliper on tele-
scopic forks
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim
Advertisement
Table of Contents
