Table of Contents
Advertisement
9
170
ATTENTION
Improper tire removal
Damage to the TPC/RDC sen-
z
sors
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding label
can be found on the rim at the
position of the TPC/RDC sen-
sor. When changing tires, ensure
that the TPC/RDC sensor is not
damaged. Inform the authorized
BMW Motorrad retailer or the
specialist workshop about the
TPC/RDC sensor.
Removing front wheel
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear-
wheel stand.
Mounting rear-wheel stands
(
160).
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
Detach wheel speed sensor
lead from retaining clips 1
and 2.
Remove screw 3 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Unintentional pressing to-
gether of brake pads
Component damage when
mounting the brake caliper or
Advertisement
Table of Contents
