Hill Start Control - BMW R 1250 R 2019 Rider's Manual

Hill Start Control

(Hill Start Control)

Display
The symbol 1 for the drive-
off assistant is displayed in the
Pure Ride view and in the upper
status line.
Switch Hill Start Control
on and off
Switching on ignition (
Call up menu Settings, Ve-
hicle settings.
Turn Hill Start Control
on or off.
Using Hill Start Control
Requirement
Vehicle at standstill. Hill Start
Control is switched on.
ATTENTION
Drive-off assistant failure
Accident hazard
Manually brake to secure the
vehicle.
NOTICE
Hill Start Control is only a con-
venience system for easier hill-
starting and should, therefore,
not be confused with a parking
brake.
58).
Apply handbrake lever 1 or
footbrake lever firmly and then
release again.
Green stop symbol is dis-
played.
Hill Start Control is activated.
To switch off the Hill Start
Control, activate the handbrake
lever 1 or the footbrake lever
again.
Stop symbol disappears.
Alternatively, drive off in 1st or
2nd gear.
4
79
z