Table of Contents
Advertisement
The new ASC/DTC system sta-
4
tus OFF! is displayed for a short
time. The ABS system status re-
70
mains unchanged.
ASC/DTC indicator and
warning light remains illu-
minated.
The ASC/DTC function is
switched off.
Switching the ASC/DTC
z
function on
Press and hold button 1 until
the ASC/DTC indicator and
warning light changes its
display behavior.
Immediately after pressing the
button 1, the ASC/DTC system
status OFF! and current ABS
system status are displayed.
ASC/DTC indicator and
warning light goes out; it
begins to flash if self-diagnosis
has not been completed.
Possible ASC system status ON
is displayed.
Release button 1 after
changeover of the status.
ASC indicator and warning
light remains off or contin-
ues to flash.
Possible ASC/DTC system status
ON is displayed.
The ASC/DTC function is
switched on.
without riding modes Pro
Alternatively, turn the ignition
off and on again.
with riding modes Pro
If the coding plug is not in-
stalled, the ignition can also be
switched off and then on again
as an alternative.
More information about trac-
tion control (ASC/DTC) can be
found in the "Technology in
detail" chapter:
How does traction control
work? (
145)
Electronic chassis and
suspension adjustment
(D-ESA)
OE
with Dynamic ESA
OE
OE
Advertisement
Table of Contents
