Table of Contents
Advertisement
4
72
Press button 1 briefly to
display current setting.
To set the damping rate:
z
Briefly press button 1 repeat-
edly until the desired setting is
displayed.
NOTICE
The damping cannot be adjusted
while the motorcycle is being
ridden.
The selection arrow 4 is dis-
played.
The selection arrow 4 goes
away after the changeover of
the status.
The following settings are avail-
able:
Road: damping for comfortable
road travel
Dynamic: damping for
dynamic road travel
To adjust the spring setting:
Start the engine (
Long-press button 1 repeat-
edly until the desired setting is
displayed.
NOTICE
The spring setting cannot be
changed while the motorcycle
is underway.
The following message is dis-
played if no adjustments are
possible: Load adjust. only
avail. when halted.
127).
Advertisement
Table of Contents
