Safety Rules - Pacific Hoists PEH050NH Operation Manual

3.SAFETY RULES

This hoist is not designed for, and should not be used for, lifting, supporting, or transporting
personnel. Any modifications to upgrade, re-rate, or otherwise alter the hoist equipment must
be authorized by either the original manufacturer or a qualified professional engineer.
Only trained personnel are allowed to operate the hoist.
Prior to each lifting operation, it is essential to make sure that:
(a) the correct lifting sling is being used.
(b) the lifting sling is located in the hook as shown below (Illust. 2) and that a safety latch has
been fitted.
Firm and steady button operation is required. Never push the button switch intermittently.
Always avoid excessive inching operation.
Always make sure the hoist motor completely stops before reversing.
Always leave the push button switch cable and bottom hook vertically static after completion
of operation, never leave them at any position which may cause swing or slip.
Slings must be applied to load evenly and centrally to ensure correct balance. Never lift any
Do not use the hoist in explosive atmosphere.
(Illust. 2)
9