Safety Rules - Pacific Hoists U-MEGA Series Operations Manual & Parts List

3. SAFETY RULES

The hoist herein is not designed for, and should not be used for,
supporting, or transporting personnel. Any modifications to upgrade, re-rate,
or otherwise alter the hoist equipment must be authorized by either the original
manufacturer or a qualified professional engineer.
(1) Prior to each lifting operation, it is essential to make sure that:
(a) the correct lifting sling is being used.
(b) the lifting sling is located in the hook as shown below (Illust. 2) and that a safety latch
has been fitted.
(c) The object to be hoisted is well secured for direct lifting (a proper lifting frame or
apparatus is strongly recommended for direct lifting .)
(2) Firm and steady button operation is required, never push the button switch
intermittently.
(3) Always avoid excessive inching operation.
(4) Always make sure the hoist motor completely stops before reversing.
(5) Always leave the pendant button switch cable and bottom hook load chain
vertically static after completion of operation, never leave them at any position,
which may allow them swing or slip.
Do not use the hoist in explosive atmosphere.
Illust. 2
8
lifting,