How To Adjust The Geared Limit Switch - Pacific Hoists PEH050NH Operation Manual

6.4How to adjust the geared Limit Switch for
1. Put in load chain from the side of chain bag and
goes through chain sprocket, press the pendant
(down) button, let the chain be at Lower Limit
Switch position.
2. Lower L/S flange set up to be close to the middle
(you can see there are 3 switch, the middle one).
Adjust Plastic screw by using #4 Hex wrench.
3. When the chain tail at lower LS is too longer.
Description
PEH200-1(NH)/ PEH 300-2(NH)/ PEH500-2(NH)
19
Picture