Pacific Hoists PEH050NH Operation Manual page 21

4. Adjust lower L/S plastic screw (the middle one) by
clockwise direction, the chain shortens. While
adjust it by counterclockwise direction, the chain
tail becomes longer. Once touch the LS, it needs to
back off the distance about 1 meter. After L/S trips
off, it can be re-adjust again.
5. The suitable chain tail location is 300-400mm.
Need to double check if it stops at correct location
after completing the adjustment.
6. Press push button UP, let the bottom hook be at
right location for Upper Limit Switch if the hook
position is too longer.
Description
20
Picture