Pacific Hoists PEH050NH Operation Manual page 18

3. Annual inspection
Your dealer should be asked to perform this inspection.
(a) Check gearing for any excessive wears or damage.
(b) Replace gearbox lubricant completely (PEH050(NH) / 800C.C., PEH100(NH) &
PEH200-2(NH) / 1400C., PEH200-1(NH) & PEH300-2(NH) & PEH500-2(NH) /4000C.C.) as
following table for your reference. NOTE: We recommend using lubricant oil
equivalent to SHELL S4 WE460.
※Table of recommended oils according to DIN 51354
ISO-VGDIN 51519
viscosity At
2
40°C (cST)
mm s
VG460
ISO-VGDIN 51519
Viscosity at
2
40°C (cST)
mm s
VG460
The permissible tolerance for each VG category is ±10% of the tabulated values.
(a)Check brake lining for any wear or damage.
(b)On completion of above checks, lift a load several times to ensure good performance of the
hoist before starting duty operation.
Warranty Details
1. Warranty Period : One year for Mechanical Spare Parts after purchase the product.
2. Non-Warranty Scope:
(a) Electrical Spare Parts (ex. Contactor, Pendant, Phase Error Relay, etc.)
(b) Expense Spare Parts (ex. Chain Bucket, Brake Lining, etc.)
(c) Damage caused by unsuitable operation.
(ex. Galvanize plant, Chemical Plant, Dye-work, etc. )
(d) Damage caused by operating on the wrong electric voltage.
(e) Damage caused by user amend the product.
(f) Damage caused by natural disaster.
3. Warranty Scope shall be permitted by Cheng Day Machinery and Within One Year of
damaged Mechanical Spare Parts Repair and Replacement.
(circumstance stated in detail No. 2 are not included.)
Approximate viscosity
of the VG Categories
2
50°C (cST)
mm s
251
Approximate viscosity
of the VG Categories
2
50°C (cST)
mm s
251
ARAL
Aral Degol
BG 460-BMB 460
SHELL TEXACO
Omala oil Meropa
S4 WE460 460
Table 6-2-b
17
BP ESSO
BP Energol Spartan
GR-XP 460 EP-460
I.P. AGIP
Mellana Blasia
460
MOBIL OIL
Mobilgear
634
TOTAL
Carter
460 EP 460