Pacific Hoists PEH050NH Operation Manual page 22

7. Counterclockwise direction to set up upper LS
plastic screw, see the photo. Adjust
counterclockwise direction if bottom hook at too
longer position. If it's too short, clockwise to
adjust it. Once touch the LS, it needs to back off
the distance about 1 meter. After L/S trips off, it
can be re-adjust again
8. Adjust it till the bottom hook is at right position
(about 300-400mm), double check and test to
make sure it's completed.
Please note
1. When adjust the plastic screw, face to L/S like
below photo direction.
2. Check the plastic screw, if turning wrong
direction, adjust it by opposite direction. Need to
re-test and check if position is correct.
3. Once touch the LS, it needs to back off the
distance about 1 meter. After L/S trips off, it can
be re-adjust again
Description
21
Picture