Pacific Hoists PEH050NH Operation Manual page 13

Prior to installation check and ensure that the top hook assembly is securely attached
to the hoist by means of the lock bolt.
When fitting the top hook ensure the direction of the hook is correct for the model of
the hoists, as indicated by the sticker adjacent to the hook attachment.
NOTE: If the hoist is to be suspended from an electric trolley, assembly may be eased
by firstly removing the top hook, attaching it to the trolley load plate, them refitting
the top hook to the hoist.
Assemble chain bucket –
Connect power supply to hoist and operate the push button switch. This operation
must be carried out by a trained person.
ELECTRIC
CONTROL
BOX
GROUNDING
(GREEN)
LOCK NUT
(Illust. 6)
R S T
CONTACTOR
RED
BLACK
WHITE
(Illust. 7)
BODY
HEX. RECESS BOLT
CABLE HANGER
1-1.5M
12
WIRE ROPE