Related Manuals for Uniden UH200 Series
Summary of Contents for Uniden UH200 Series
- Page 1 UH200 Series UHF CB Transceiver For more exciting new products please visit our website: Australia: www.uniden.com.au...
-
Page 2: Warnings And Information
Warnings and Information WATER WARNING Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. LITHIUM ION BATTERY PACK WARNING • This equipment contains a Lithium Ion Battery Pack. • The Lithium Ion Battery Pack contained in this equipment may explode if disposed of in a fire. -
Page 3: Included In Your Package
Included in your Package 2 x Earpiece Mic 2 x UH200 Radio 2 x Li-ion Battery* 2 x Lanyards 2 x Belt Clips* 1 x Soft Carry Case 1 x Owner's Manual 1 x Twin USB AC adaptor 2 x Micro USB cable * Items may come pre-fitted If any of these items are missing from the box, contact your place of purchase, immediately. -
Page 4: Lcd Display
Key Beep On/Off MENU Mode Press Press & Hold [ + ] Next setting Scroll up through settings [ - ] Previous setting Scroll down through settings [ M ] Menu Mode Save setting & Exit MENU Mode UNIDEN UH200 Series... -
Page 5: Getting Started
Getting Started Install / Remove the Battery Pack To install the battery pack 1. Lever the bottom of the battery into the bottom of the battery compartment and then fit the battery in until the release latch at the top locks into place. To remove the battery pack 1. -
Page 6: Charging The Rechargeable Battery
The Transmit Mode is also disabled. Recharge the batteries. Power Save Your UH200 Series has a unique circuit designed to extend the life of the batteries. If there is no transmission nor an incoming call within a certain time, your Radio switches to the Power Save mode. The Radio is still able to receive transmissions in this mode. -
Page 7: Operation
The UH200 Series uses the UHF-CB Channels. Refer to page 13 for UHF channel usage. • The transmit power of the UH200 Series is 2W in high power mode and 500mW in low power mode, see p4, Combination Keys (Standby Mode). - Page 8 • Press [ M ] 2 times until S9 flashes on the display. • Then press [ + ] or [ - ] to change the setting between 00-09, and then press & hold [ M ] to save the desired setting. UNIDEN UH200 Series...
- Page 9 Operation | MENU Mode CTCSS (Continuous Tone Coded Squelch System) CTCSS is a feature that allows a group to talk to each other without hearing other users on the same channel. (Digital Coded Squelch) DCS is a digital extension of CTCSS. It provides 104 extra, digitally coded squelch codes that follow after the 50 CTCSS codes.
-
Page 10: Scan Memory
• Press [ M ] 6 times until U flashes on the display. • Then press [ + ] or [ - ] to change the setting between off, 1-10, and then press & hold [ M ] to save the desired setting. UNIDEN UH200 Series... -
Page 11: Busy Channel Lockout (Bcl)
Operation | MENU Mode Busy Channel Lockout (BCL) This feature prevents accidental transmission on a busy channel. For example, BCL is used when CTCSS or DCS is selected to prevent transmission when the radio detects a transmission from another unit using the same CTCSS or DCS code. - Page 12 • Then press [ + ] or [ - ] to change the setting to on or off, and then press & hold [ M ] to save the desired setting. When scramble is enabled the radios you are comunicating with need to have scramble enabled to understand you. NOTE UNIDEN UH200 Series...
-
Page 13: Uhf Channels And Frequencies
UHF Channels and Frequencies Always listen on a channel (or observe the receive signal level meter) to ensure it is not already being used before transmitting. Channels 5 and 35 are used for emergency channels. CTCSS will not operate on these channels. Please follow these guidelines for channel use in Australia: •... -
Page 14: Warranty
Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the UH200 Series (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below. - Page 15 Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the address shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
- Page 16 THANK YOU FOR BUYING A UNIDEN PRODUCT. © 2020 Uniden Australia Pty Limited. Printed in PRC.
Need help?
Do you have a question about the UH200 Series and is the answer not in the manual?
Questions and answers