Congratulations on purchasing your new Ozone 500-i Multifunctional Ozone &
Negative Ion Generator! Please read these instructions before operating.
Features and functions include purifying air and water, cleaning fresh foods, eliminating odors, and killing
bacteria. It also works great for improving air quality in schools, hospitals, offices, homes, and businesses.
There is no maintenance required, simply wipe off the unit periodically with a damp cloth. Do not use any
chemicals or cleaning agents on the unit itself.
Installation
1. First, attach the ceramic diffusion stone to the tube by wiggling
the tube onto the ceramic stone connection piece.
(Photo 1)
2. Next, attach the other end of the tube to the unit by wiggling
the tube onto the tube connection piece (located on the right
side of the unit, to the left of the "Beware Electric" warning
sticker. (Photo 2)
3. Finally, plug the power cord into the power receptacle and then
into a wall outlet.
Start Up
Press the On/Off button.
Then press the "Set" button to use either the Ozone Generator (RED
light), or the Negative Ion Generator (GREEN Light). However, you cannot
run both at once.
At this point, the air pump will start up but the unit will be on standby.
Set the timer to the amount of time desired using the "+" and "-"
buttons, and let it run. The unit will start to buzz, and after about a
minute or so, you should be able to smell the ozone (do not directly
inhale).
Clean Water Made Easy
www.cleanwaterstore.com
www.CleanWaterStore.com
Photo 1
Photo 2
Rev 013015
Need help?
Do you have a question about the Ozone 500-i and is the answer not in the manual?
Questions and answers