1. Manuals
  2. Brands
  3. Clean Water Systems Manuals
  4. Water Filtration Systems
  5. 7500-M
  6. Installation manual

Clean Water Systems 7500-M Installation Manual

Hide thumbs Also See for 7500-M:
Table of Contents

Advertisement

Quick Links

Download this manual
Clean Water Made Easy
www.cleanwaterstore.com
7500-M Sediment Filter Installation Guide
Thank you for purchasing a Clean Water System! With proper installation and a
little routine maintenance your system will be providing Sediment free water for
many years.
Please review this start‐up guide entirely before beginning to install your system,
and follow the steps outlined for best results.
Minimum pressure of 30 PSI recommended.
Maximum pressure recommended 80 PSI.
For indoor installation only.
Protect from sunlight, rain, and freezing.
SEDIMENT MEDIA CONTAINS DUST.
USE MASK TO AVOID BREATHING DUST.
OK to wet down media with spray bottle
Questions?
Call us toll‐free: 1‐888‐600‐5426 or 1‐831‐462‐8500
Email us:
support@cleanwaterstore.com
See more information on our website:
www.cleanwaterstore.com/resources

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7500-M and is the answer not in the manual?

Questions and answers

Related Manuals for Clean Water Systems 7500-M

Summary of Contents for Clean Water Systems 7500-M

  • Page 1 Clean Water Made Easy www.cleanwaterstore.com 7500-M Sediment Filter Installation Guide Thank you for purchasing a Clean Water System! With proper installation and a little routine maintenance your system will be providing Sediment free water for many years. Please review this start‐up guide entirely before beginning to install your system, and follow the steps outlined for best results.

  • Page 2: Table Of Contents

    Table of Contents Packing Lists ..............................3 Pre‐Installation .............................. 4 Best Practices for Piping & Drain Installation: ....................4 Installation of Your System in Copper or Metal Piping Systems: ..............5 How Your Sediment Filter Works: ......................... 6 Assembly and Installation Instructions: ......................7 Programming Your Valve and Setting Time and Days for Backwash ............

  • Page 3: Packing Lists

    7500-M Sediment Filter Installation & Startup Guide Packing Lists All systems include: 7500‐M control valve, 3 female NPT to BSP black pipe adapters, power supply, funnel for adding media, top screen, start‐up guide, and items included in one of the following options: Find Your Size System to See What is Included: Sediment Filter 0.75 cubic foot size...

  • Page 4: Pre-Installation

    7500-M Sediment Filter Installation & Startup Guide Pre-Installation 1. Review your packing list and make sure you have received all the parts before installation. 2. If you are going to be turning off the water to the house and you have an electric water heater, shut off the power to the water heater before beginning installation in case water heater is accidentally drained.

  • Page 5: Installation Of Your System In Copper Or Metal Piping Systems

    7500-M Sediment Filter Installation & Startup Guide Installation of Your System in Copper or Metal Piping Systems: If your new filter system is to be installed in a metal (conductive) plumbing system, i.e. copper or galvanized steel pipe, the plastic components of the system will interrupt the electrical continuity of the plumbing system.

  • Page 6: How Your Sediment Filter Works

    7500-M Sediment Filter Installation & Startup Guide How Your Sediment Filter Works: Water enters the top of the tank and flows down through the media and up the distributor tube. The backwashing Sediment Filter removes sediment and is automatically backwashed.

  • Page 7: Assembly And Installation Instructions

    7500-M Sediment Filter Installation & Startup Guide Assembly and Installation Instructions: 1. Wrap the top of distributor tube with electrical or duct tape so that no gravel or Sediment media will go down the distributor tube when adding the media.

  • Page 8: Programming Your Valve And Setting Time And Days For Backwash

    7500-M Sediment Filter Installation & Startup Guide Programming Your Valve and Setting Time and Days for Backwash Next, you will need to program the system to work as a Sediment Filter. There are a few settings that must be changed before the system can be put into service. Plug in the control valve and begin the programming instructions.
  • Page 9 7500-M Sediment Filter Installation & Startup Guide 1) To change the Time of Day: Change programming mode to Time of Day ( [00:00] and time of day icon displayed ). The hour and Enquiry/Setting icon will be flashing. Change the hour value with the Up/Down buttons, then press Menu/Confirm to move onto the minute value.

  • Page 10: Initial Backwash

    7500-M Sediment Filter Installation & Startup Guide To set this, change the programming mode to Service Days ( [1‐03D] ). Press the Menu/Confirm button and use the Up/Down buttons to set it to your desired amount. Press Menu/Confirm to confirm your input.

  • Page 11: Maintenance

    7500-M Sediment Filter Installation & Startup Guide You can easily run the drain hose to a bucket and using a watch verify the flow rate in gallons per minute. An adequate backwash is critical to properly clean the Sediment media and prevent it from cementing together.

Table of Contents