Setting Various Function Modes; Switching On The Back Lighting For The Display; Disabling And Enabling The Buttons - Sangean ProTravel PT-80 Operating Instructions Manual

02 Yacht Boy 80, GB
16
19.08.2003 14:52 Uhr
OPERATION

Setting various function modes

Using the »MODE« button and a two-digit code, which you enter using the
numerical keys »0 ...
Code Function
MODE 10 FM frequency change
in 100 kHz steps
MODE 20 MW frequency change
in 9 kHz steps
MODE 30 Time display in 12
hour format
MODE 40 Signal tone off
MODE 50 Arrange stations in
sequence from low to
high frequency range
This is how to change the various function modes:
1 Press »MODE«.
)« flashes.
– Display: »(
Enter the code, for example »40«, using
2
– Display: »( 40 )« flashes.
Press » FREQ./CLOCK« to confirm.
3
– Display: briefly »OFF«, then the time or frequency.
– The signal tone is deactivated.

Switching on the back lighting for the display

Press »LIGHT« to switch on the display lighting for 7 seconds.
1
2 Press »LIGHT« to switch off the display lighting.

Disabling and enabling the buttons

To disable the buttons, move »LOCK« to the »
1
– Display: » «.
To enable the buttons, move »LOCK« to the opposite position.
2
– Display: » « disappears from the display.
Seite 36
_______________________________________________
9«, you can change various functions:
Code
11
21
31
41
51
»0 ...
Function
FM frequency change
in 200 kHz steps
MW frequency chan-
ge in 10 kHz steps
Time display in 24
hour format
Signal tone on
Arrange stations in
sequence from low to
high frequency range
9«.
• « position.