Switching On And Off; Radio Operation - Sangean ProTravel PT-80 Operating Instructions Manual

02 Yacht Boy 80, GB 19.08.2003 14:52 Uhr
OPERATION

Switching on and off

Press »ON/OFF
1
– You will hear the radio station last selected.
2 Press »ON/OFF
– Display: Local time 1 or 2.

Radio operation

Selecting the frequency band
1 Select the desired waveband (FM, SW, MW or LW) by pressing
»BAND«.
If you select short wave, you can select the frequency band by pressing
2
»SW SELECT«.
– Display: the SW frequency bands from »120 m« to »11 m«.
Calling up stored radio stations
Select the station using the numerical buttons »
1
number.
– Display: the frequency and the preset number, for example »
To call up preset numbers 10 to 18 in the SW band, press
2
1/2« to switch to the second memory level.
CLOCK
– Display: »
M 2
Notes:
For FM reception pull out the telescopic antenna and tilt it until you
receive the best signal. For short wave reception (SW) the antenna
should be upright. For medium wave and long wave reception, align
the antenna by turning the device.
Checking stored radio stations
You can call up all the stored radio stations in a wave band automatically
for seven seconds (memory scan).
With the radio playing, press
1
– The device starts with the current preset station and soon changes to
the next one.
– When you reach the station you want, press
the function.
Swapping preset positions
Enter the preset station to swap using the numerical buttons
1
Press »MEMO
2 AM/PM«.
– Display: the selected preset position flashes.
3 Enter the new preset position using the numerical buttons »
– A signal sounds and the preset positions are exchanged.
Seite 31
__________________________________________
SLEEP« to switch on the device.
SLEEP« to switch off the device.
«.
»0 M.
SCAN«.
9« for the preset
1 ...
«.
»SW PAGE
»0 M. SCAN« to stop
»1 ...
9«.
1 ... 9«.
11