Setting The Alarm Function - Sangean ATS-303 User Manual

The On/OFF switch and all tuning options are not functional. lt is not
possible to switch the appliance on until the operational lock has
been deactivated.When the machine is switched off, the operational
lock ensures that the machine is not turned on accidentally, for ex-
ample when being transported in a suitcase or bag.
To release the lock, move the switch

Setting the alarm function

The alarm time should be set when the radio is not on. The correct
alarm time is dependent on the correct setting of the clock (see sec-
tion " Setting the clock" ).
Either /
conds in the display depending on the position of switch
12
STAND BY.
RADIO
STAND BY
10-90
D
STANDBY or
STAND BY
10-90
The operational lock is on when
switch is under the key sym-
bol.
13
down.
Press key DISPLAY TIME SET
briefly and release it immediately.
DISPLAY
TIME SET
STEREO
MONO
E
/ STANDBY appears for approx.5 se-
While the STANDBY display is
blinking, press key
DISPLAY
TIME SET once again and hold it
TIME SET
until the digits in the time display
STEREO
MONO
also blink.
DISPLAY
6 13