Setting The Clock; Initial Operation; Dab+ (Digital Radio) - Sangean DPR-34+ Instructions Manual

Setting the clock

The DPR 34's clock will automatically update
each time you turn on the radio and tune to a
DAB+ radio station or to an FM station which
is broadcasting the time via RDS. Time display
will flash 0:00 for a few seconds then display
the clock time when it receives DAB+ or
FM – RDS clock time signal.
Initial operation –

DAB+ (Digital Radio)

This step is only necessary for initial setup –
1. Ensure the battery is fully charged.
2. Fully extend the telescopic antenna.
3. Press the Power button on the left hand side
of your radio.
9