Alarm Mode; Displaying The Alarm Time; Alarm With Radio Station - Sangean ProTravel PT-80 Operating Instructions Manual

02 Yacht Boy 80, GB
14
19.08.2003 14:52 Uhr
OPERATION

Alarm mode

Displaying the alarm time

1 Press »ALARM
– Display: briefly, the alarm time most recently set, »
flash.
Alarm with signal tone
With the device switched off, press
1
– Display: the last alarm time set, »
Enter the alarm time using the numerical buttons
2
3 Press » FREQ./CLOCK« to confirm the entry.
– Display: the alarm time you entered, »
– The device switches on with the signal tone at the set time (alarm
duration 1 hour). The signal tone increases in volume for one minute,
stops for a minute and starts again.

Alarm with radio station

1 Press »ON/OFF
Select the frequency band and the radio station.
2
Adjust the alarm volume using
3
device).
Press »DISPLAY« to switch the display to the clock.
4
Press »ALARM
5
– Display: the last alarm time set, »
6 Enter the alarm time using the numerical buttons
Press » FREQ./CLOCK« to confirm the entry.
7
– Display: the alarm time you entered, »
Press »ON/OFF
8
– The device switches the radio on at the set time (alarm duration
1 hour).
Cancelling the alarm for the day
Press »ON/OFF
1
– The alarm (signal tone or radio) stops, but the alarm function remains
activated for the next day at the set time.
Cancelling alarm stand-by
1 Press »ALARM
– Display: the set alarm time, »
To deactivate the alarm, press
2
– Display: the alarm time and »
the current time.
Seite 34
_______________________________________________
« or »ALARM «.
»ALARM
« flashes.
« stays lit.
SLEEP« to switch on the device.
»VOLUME
« (radio station).
« flashes.
« stays lit.
SLEEP« to switch off the device.
SLEEP« while the alarm is sounding.
« or »ALARM «.
« or »
»C M.
DEL«.
« or »
« or » «
« (signal tone).
»1 ...
0«.
|
« (on the right of the
»1 ... 0«.
« flash.
« go out, and you can see