Advertisement
Quick Links
Advertisement
Related Manuals for Glow Bricks Lego Star Wars Emperor's Throne Room 75352
Summary of Contents for Glow Bricks Lego Star Wars Emperor's Throne Room 75352
- Page 1 Emperor’s Throne Room...
- Page 2 First of all, remove the stands on both sides and split all the parts Take the black clips away and leave the remain parts here...
- Page 3 Assemble the black lighting clips on one side of the stand Then move it to the other side and assemble them Rearrange the base by putting the 1x8’s at the bottom with one 1x2 plate on each side, the cover the top by the remain 1x2 and the 1x10...
- Page 4 Put the clear blue slopes back on the stand Before restoring the stand, remove some tiles on the base to leave space for the wires...
- Page 5 Now put the stands back on the base, the wires in between them could be hidden under the tile on the middle The connector will be moved to the back of the whole model, there’s space at the back to make the wire get through...
- Page 6 Now move the sabers to the front of the throne Remove the tiles and plates to get them through After the sabers to placed on the correct position you can restore the tiles...
- Page 7 The remain lighting plate would be assembled on top of the throne Then move the connector get through to the back...
- Page 8 Put the minifigures back on the model Then the installation of the light is basically done However, if you dislike the position of the sabers placed, you can remove the shown tiles to release the sabers and place them to where you like...
- Page 9 After the sabers are settled, restore the tiles removed At last, connect the USB cable to power up the lights...
Need help?
Do you have a question about the Lego Star Wars Emperor's Throne Room 75352 and is the answer not in the manual?
Questions and answers