Advertisement
Table of Contents
- 1 Separate the Base to Modify It
- 2 Split and Rearrange the Base
- 3 Assemble Plates on the Base and Detach Helmet Top
- 4 Assemble Spot Lights and Manage Cables
- 5 Assemble the Lighting Plate and Move Connector
- 6 Restore the Helmet and Power Via USB Cable
- 7 Power by Battery and Power Bank Considerations
- Download this manual
Advertisement
Table of Contents
Related Manuals for Glow Bricks Lego Star Wars Darth Vadar Helmet 75354
Summary of Contents for Glow Bricks Lego Star Wars Darth Vadar Helmet 75354
- Page 1 Darth Vadar Helmet...
- Page 2 First of all, separate the base to modify it by the 1x2 plates provided...
- Page 3 Split the base as shown, detach the 1x8s and 1x10s on the side Rearrange the base by putting the 1x8’s at the bottom with one 1x2 plate on each side, the cover the top by the remain 1x2 and the 1x10...
- Page 4 Then assemble the 1x2 and 1x10 plates on the base Restore the base, then detach the top of the helmet...
- Page 5 Assemble the spot lights on the expanded corners of the base, then move the remain lights to the top of the helmet The cable from the spot light to lighting plate could be stabilized at the shown area Remove the shown parts, put the cable in between then put it back...
- Page 6 Assemble the lighting plate Then move the connect to the back...
- Page 7 Now you can restore the helmet To power up by the USB cable, just simply connect it with the connector...
- Page 8 To power by battery, remove the back part from the helmet and stick the battery case as shown Then move the connect to the back *Beware, if you powered by power bank with protection it might be turned off by itself due to the power consume is too little, then you need to power by AC adaptor or use the battery...
Need help?
Do you have a question about the Lego Star Wars Darth Vadar Helmet 75354 and is the answer not in the manual?
Questions and answers