Advertisement
Quick Links
Advertisement
Related Manuals for Glow Bricks Lego Star Wars Commander Cody Helmet 75350
Summary of Contents for Glow Bricks Lego Star Wars Commander Cody Helmet 75350
- Page 1 Commander Cody Helmet...
- Page 2 First of all, separate the base to modify it by the 1x2 plates provided...
- Page 3 Split the base as shown, detach the 1x8s and 1x10s on the side Rearrange the base by putting the 1x8’s at the bottom with one 1x2 plate on each side, the cover the top by the remain 1x2 and the 1x10...
- Page 4 Then assemble the 1x2 and 1x10 plates on the base Assemble the white 1x4 lighting plate at the shown area...
- Page 5 Then assemble the spot lights at the expanded corners of the base Move the remain light to the upper area of the helmet, the wire could be hidden on the side...
- Page 6 Replace the white part in the red circle, remove the clear red tile from it and put on the lighting part Then you may power it up by the USB cable of the battery case At last, place the 2 spot lights at the front corner and connect the USB cable to power it up *Beware, if you powered by power bank with protection it might be turned off by itself due to the power consume is too little, then you need to power by AC adaptor...
Need help?
Do you have a question about the Lego Star Wars Commander Cody Helmet 75350 and is the answer not in the manual?
Questions and answers