K30 Pro Optical Sensor Quick Start Guide
Quick Start Guide
30 mm Programmable Multicolor RGB Optical Sensor and Indicator
This guide is designed to help you set up and install the K30 Pro Optical Sensor. For complete information on programming, performance,
troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for part num
ber 231384 to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards and practices.
WARNING:
•
Do not use this device for personnel protection
•
Using this device for personnel protection could result in serious injury or death.
•
This device does not include the selfchecking redundant circuitry necessary to allow its use in personnel safe
ty applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output
condition.
Models
Family
K30
Overview
The K30 Pro Optical Sensor is an adjustable field optical sensor that can detect a wide variety of materials and objects.
Model
PVS28D
Original Instructions
June 22, 2023
•
Programmable using Banner's Pro Editor software and Pro Converter Cable
•
Up to 7 colors in one device (14 colors using Pro Editor)
•
Devices are completely selfcontained—no controller needed
•
Teachable modes with color feedback for ease of use
•
Touchless activation removes the need for physical force to activate
•
Rated IP65
•
10 V DC to 30 V DC operation
•
Resistant to ambient light, EMI, and RFI interference
•
Sensing and indication in one device
Activation
Style
Method
Output State
P
AF100
A
AF100 = 100mm adjustable field*
AF1000 = 1000mm adjustable field*
Measurement
Detection Area
Reference Point
Detection not
possible
D0
D1
D0 (mm)
0
© Banner Engineering Corp.
Output
Function
Color/Control
Connector
M
Q
Q = 5-pin or 8-pin integral
M12 quick disconnect
M = Momentary
depending on model **
RGB7 = Programmable Multicolor
Reliable detection of a stationary
and moving object
Switch Point D1 (mm)
20
** Models with a quick disconnect
require a mating cordset
D2
Switch Point D2 (mm)
500
p/n: 232898 Rev. B
232898