Cooling Circuit - Dantherm 3000 Service Manual

Cooling circuit

Introduction
WARNING

Cooling circuit

Part designation
22
This section describes the active cooling system
Never carry out any installation, maintenance or service, without disconnecting the AC
power supply, by means of the external power supply disconnecting devices.
Service on any cooling circuit with cooling refrigerant is only too carried out by a trained
cooling technician.
This is the cooling circuit schematic:
This tables shows the part designation for cooling schematic at Fig. 6
Pos.
G1 Rotary cooling compressor
R1 Condenser
R2 Evaporator
R3 Dry filter
R5 Thermo valve with external capillary sensor
Fig. 6
Description