Table of Contents
Advertisement
Installation - outdoor
Introduction
Flush wall outdoor
mounted
12
The unit can be mounted outdoor, flush to the wall, or through wall. Is through wall
please jump to next section in this manual
Mounting procedure for outside flush:
Step
1
Unpack the unit, and locate the enclosed paper cutout template
2
Place and secure this paper template on the wall, at an appropriate location
and in correct level.
3
Draw up the inner cutout line, and mark the 16 pcs. Holes to be drilled
4
Cut with an appropriate tool the inner wall part away.
5
Drill the 16 pcs holes (8mm appropriate for the M6 holes in the unit frame)
Illustration:
Action
Continued overleaf
Advertisement
Table of Contents
