Replacing parts,
Evaporator fan
Evaporator fan
replacement
illustration
26
continued
Follow these steps in order to exchange one or both of the evaporator fan
Step
1
Disconnect power
2
Remove the 23 pcs. TX 20 screws (pos.1) from the outer cover
3
Gently pull out the outer cover, and remove it
Remove the 4 pcs. TX 20 screws (pos. 2), holding the fan bracket
3
Loosen the fan supply cable..
4
Gently pull out the fan assembly
5
Remove the 4 pcs. screws holding the fan, and replace the fan
6
Run the new wires back to the control board, and swap plug from old fan to
new fan, and remove the old fan completely. (pos. 3)
7
Inspect the unit according list at page 18
8
Secure the new cable with cable ties
9
Re-assemble the unit in the opposite order
Action
Continued overleaf