Joystick Error And Flashing Leds; Electrical Fault; Batteries - Permobil Explorer Mini User Manual

5.10

Joystick error and flashing LEDs

If an electrical fault occurs in the control panel, the LEDs on the battery
indicator will flash quickly and the joystick will not work properly. The
Explorer Mini needs to be turned off and then on again.
To start the Explorer Mini:
1. Make sure that the joystick is in the neutral position.
2. Press the on/off button to turn off the control panel.
3. Remove the tray top to make sure that the LEDs on the control panel are
off.
4. Press the on/off button to turn on the control panel again.
If the LEDs on the battery indicator still flash quickly, contact your service
provider for support.
5.11

Electrical fault

The main circuit breaker also functions as a fuse, and the Explorer Mini will
automatically be turned off if an electrical fault occurs. If this happens you
can try to turn on the Explorer Mini again.
If the Explorer Mini is overloaded because of high power consumption, the
main circuit breaker may be tripped, and a major electrical fault may be the
cause. Carefully investigate the cause before you start the Explorer Mini
again.
If you cannot turn on the Explorer Mini again, contact your service provider for
support.
5.12

Batteries

How often the batteries need to be charged depends on several things, for
example how you use the Explorer Mini, the ambient temperature, and how
old the batteries are.
64 - Handling and driving