Permobil Explorer Mini User Manual page 45

4. Push the seat into the groove on the column.
5. Carefully move the seat up or down to a setting.
6. Release the plunger knob ( ). A click signals that the plunger knob is
locked.
7. Put back the tightening knob ( ) and tighten it by hand.
4.2 Table and backrest unit
When the height of the table and backrest unit is adjusted, it affects the
distance between the seat and the base module.
The center of gravity changes when you change the position of the table and
backrest unit. When you raise the table and backrest unit, you decrease the
wheelchair's stability.
Adjustments - 45