Transporting The Device - probst STS-33-EASY Operating Instructions Manual

Operation
4.3

Transporting the device

The empty device (without stone plate) may only be transported (moved) by hand by lifting the handle
❷.
•
To do this, the transport lever ❸ must be brought into a horizontal position and held.
•
At the same time, move the handle ❷ upwards until it rests against the transport lever ❸.
•
Now the device can be transported (moved or pulled).
•
When the device is completely placed on the ground, the transport lever ❸ is released and the
handle ❷ can be moved freely again.
Fig. 1
Fig. 3
Alternatively, the empty device (without stone
plate) can also be transported (lifted) with the
help of a crane, wheel loader, etc. on the
additionally attached lifting eye.
For this purpose, use a safe and suitable sling
such as a chain, sling, crane hook or similar.
51200082 - 51200086
90°
9 / 11
Fig. 2
Fig. 4
Fig. 5
GB