Transporting The Device - probst STS-EASY Operating Instructions Manual

Operation
inch / cm
Fig. 5
4.3

Transporting the device

The empty device (without stone plate) may only be transported (moved) by hand by lifting the handle ❷.
•
To do this, the transport lever ❸ must be brought into a horizontal position and held.
•
At the same time, move the handle ❷ upwards until it rests against the transport lever ❸.
•
Now the device can be transported (moved or pulled).
•
When the device is completely placed on the ground, the transport lever ❸ is released and the handle ❷
can be moved freely again.
Fig. 1
Fig. 3
51200082 - 51200086
90°
10 / 13
Fig. 6
Fig. 2
Fig. 4
GB