Maintenance, Cleaning And Storing - Westfalia 94 07 70 Original Instructions Manual

The saw blade should not be longer than required for the intended cut.
A 4 cm longer saw blade will avoid excessive kickback.
Note: Immediately switch OFF the pruner if the saw blade comes
loose, is crooked or damaged or if the saw blade jams. Slightly open
the sawn split in the workpiece and extract the saw blade. Do not try to
finish the cutting process with a jammed saw blade to avoid injury or
damaging the pruner and the saw blade.

Maintenance, Cleaning and Storing

For best performance, always keep the saw blade and the pruner in
good order.
 Before carrying out any work on the pruner, remove the pruner
attachment from the motor unit.
 To clean the blade clamp, slightly tap the pivoting shoe on an even
surface. To remove bigger cutting residue, clean the blade clamp
with a paintbrush or with compressed air.
 Do not allow liquids of any kind enter the pruner saw.
 Check that all screws and parts of the pruner are firmly secured in
regular intervals.
 Store the pruner attachment out of the reach of children and persons
in need of supervision.
 Before cleaning or maintaining the grass and hedge shears remove
the battery and then the blades. Handle the blade with protective
gloves.
Maintenance and Cleaning
4 cm
45
Saw Blade too short