Table of Contents
Advertisement
3. To re-attach the gear cover (6) first arrange the locking pins at the
bottom side of the gear cover into the provided notches on the unit.
Slide the gear cover in direction to the blades until the gear cover
locks visibly and audibly with the housing. For inserting and remov-
ing the blade for hedges and bushes, proceed in similar way.
Angle Adjustment
The handle of the grass and hedge shears can be tilt to totally 6 angle
positions (incl. 0° position).
Hold the unit on the handle and press the PUSH button inwards. Tilt
down or lift up the handle according to the working position you need
for the respective application.
Operation
press PUSH
Button
38
Lift up or tilt
down the Handle
Advertisement
Table of Contents
