Table of Contents
Advertisement
Using the Wheel Assy
1. Press the wheel assy in the
grass and hedge shears until
the assy locks audible. On both
sides of the housing you will
find two notches. Make sure
the wheel assy locks in these
notches.
2. Use the wheel assy when
trimming
ground. Hold the handle of the
grass and hedge shears firmly
in your hand and do not force the grass and hedge shears while
trimming.
3. To remove the wheel assy, hold the handle of the grass and hedge
shears firmly in one hand and jerky pull the wheel assy out of the
unit.
Using the Extension Pole and Wheel Assy
1. Remove
extension pole.
2. To extend the extension pole, release the
lever (10). Pull out the extension pole up
to the desired length and close the re-
lease lever (10) again.
3. Fold down the bracket (11) in order to
lock both components together.
4. Insert the grass and hedge shears into
the extension pole.
5. Inset the rechargeable battery (1) into the
slot of the extension pole.
6. For switching on the unit, first press the
safety switch (7) on the extension pole
and then depress the ON/OFF-Switch
(8). Please note that the ON/OFF switch
grass
over
the
battery
Operation
the
(1)
from
the
39
1
Advertisement
Table of Contents
