Table of Contents
Advertisement
Make sure to have a safety stand when operating the grass
and hedge shears. When using ladder or scaffold, make sure
the stands are stable and cannot topple over. Always keep
yourself balanced when cutting with the grass and hedge
shears.
Do not carry the grass and hedge shears with the fingers on
the ON/OFF switch. To protect the blades when not in use
always slide the blade protection over the blades. Careful
handling with the grass and hedge shears reduces the risk of
injury.
Do not attempt to remove cut material from the blades or to
hold material to be cut when the blades are running. Remove
jammed material from the blades after the grass and hedge
shears is switched off. A moment of inattention while operat-
ing the grass and hedge shears may result in serious personal
injury.
The blades are very sharp. Do not
touch the blades during use and keep
fingers, hair, clothing and similar
objects away from the blades. Switch
on the unit only when your fingers and
feet are clear off the blades. Please note that the blades will
still move for some seconds after switching off. Wait unit the
blades have come to a standstill.
Keep the blades always sharp and clean. Replace defective
or completely worn blades with original parts only. Blunt
blades will overload of the grass and hedge shears.
When cutting grass or hedges make sure the blades will not
touch stones, wire etc. Always make sure metal parts, fences
etc. cannot be caught in the blades. This will lead to damage
to the blades and the unit. When the blades become blocked,
immediately switch off the unit.
Safety Notes
8
Advertisement
Table of Contents
