Inserting The Blades Into The Grass And Hedge Shears; Switching On And Off; Inserting And Removing The Blades - Westfalia 94 07 70 Original Instructions Manual

Inserting the Battery into the Grass and Hedge Shears
1. Insert the battery into
the grass and hedge
shears by pushing the
battery all the way
into the battery slot.
2. For removing
battery, simultaneous-
ly hold both buttons
on the battery pressed
and pull it out.

Switching ON and OFF

1. To turn the grass and hedge
shears on, first press the
safety switch (3) inwards and
then depress the ON/OFF
switch (2).
2. To turn off the grass and
hedge shears, release the
ON/OFF switch.
Please note that the blades
will run for some seconds after
switching off the unit. First wait
for the blades to come to
standstill and then place the
unit down.
Hints
Do not force the grass and hedge shears while trimming hedges or
cutting grass. Always use common sense during work.
Please observe the national regulations concerning noise protection.
The use of the garden tool is restricted on certain days (holidays) and
at certain times (noonday).
To avoid injuries preferably remove the battery from the unit when not
in use and after work.
Operation
the
36
(1)
3
2