Install Feed Tubes - Graco Advanjet 26B970 Setup And Operation Manual

Install Feed Tubes

NOTE: Feed tubes and syringe brackets are sold
separately. See Tools and Accessories on page 17.
Rubber Feed Tube
1. Install the syringe bracket using the two screws
included to attach to the Jet.
2. Attach the feed tube to the outlet of the syringe.
Syringe
Syringe
Outlet
Rubber Feed Tube
F . 8
IG
3. Push the rubber feed tube over the barb of the
nozzle plate (AA).
4. Secure the syringe to the bracket by tightening the
thumbscrew.
Thumbscrew
F . 9
IG
3A8813A
Barb
Installation
11