Table of Contents
Advertisement
Install Hardware
For 246085 only. For Kit 248848 continue on step 12.
1. Turn Reactor main power OFF
power supply.
WARNING
Read warnings in Reactor repair manual. Wait 5 min
for stored voltage to discharge (E-30 and E-XP2 mod-
els only).
2. Remove side plate (A). The plate is on the right side
of the Electric Reactor (shown) and on the left side
of the Hydraulic Reactor.
2
3. For Electric Reactor, thread wires (B, C) and cables
(H, P) of interface module (1) through boot in top of
cabinet.
For Hydraulic Reactors, orient power supply 90° as
. Disconnect
shown by moving DIN rail (only 1 nut is used).
Electric Reactor
TI3576a
4. Attach interface module (1).
A
TI2500a
Hydraulic
Reactor
5. Open Reactor cabinet.
Hydraulic Reactor
P
TI19356a
H
B
C
1
Electric
Reactor
Install Hardware
P
H
B
C
TI3575a
1
TI7999a
309867G
Advertisement
Table of Contents
