Table of Contents
Advertisement
Install Feed Tubes, HV-2000b
and HV-9500b
NOTE: Feed tubes and syringe brackets are sold
separately. See Tools and Accessories on page 28.
Rubber Feed Tube
1. Install the syringe bracket using the two screws
included to attach to the Jet.
2. Attach the feed tube to the outlet of the syringe.
Syringe
Syringe
Outlet
Rubber Feed Tube
F
. 11
IG
3. Push the rubber feed tube over the barb of the
nozzle plate (AA).
4. Secure the syringe to the bracket by tightening the
thumbscrew.
Thumbscrew
F
. 12
IG
3A8600B
Metal Feed Tube
NOTE: A tilted face seal nozzle plate (top) (AD) is
required when using a metal feed tube.
1. Remove the lower syringe bracket from the syringe
bracket.
Syringe
Bracket
Lower Syringe
Bracket
F
. 13
IG
2. Install the face seal o-ring (included with nozzle
plate kit) into the recess on the tilted face seal
nozzle plate (top) (AD).
Barb
Metal Feed
Tube
F
. 14
IG
3. Attach the metal feed tube to the tilted face seal
nozzle plate (top) (AD) using the included fasteners.
Torque the fasteners to 0.9 N•m (8.0 lbf-in.). An
optional torque wrench is available for this purpose.
AD
O-Ring
Installation
13
Advertisement
Table of Contents
