Function Tests
Manual Storage
Platform
Assembly
Test Tilt Sensor
•
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Move the aerial platform on to a slope not
greater than 10°.
2. Use the ladder to dismount from
platform.
3. On base control console, slowly raise the
platform.
Result: When platform reaches an
appropriate height, a warning signal
should sound and platform stop raising
as lift and drive controls should be
disabled.
SJIII Compacts & Conventionals
Box
wARNiNG
wARNiNG
February 2008
Section 2 - Operation
Platform Control Console
Platform
Railing
SKYJACK, Page 37